Hobie Pro Angler 12 – a short review

When Hobie introduced the Pro Angler 14 I remember looking at the sheer size of the kayak and dismissed it as being obscenely large and not particularly practical as a fishing kayak. Looking back, those views were somewhat narrow minded and focused around my own fishing requirements and experiences. In August of this year I spent a week kayak fishing in Florida and had the chance to check out the Pro Anglers up close and personal. My views were still unchanged, I still considered it a beast and I couldn’t take it seriously.

I was then selected to represent Hobie Team GB at the Hobie World Championships in Texas in November this year. Hobie were of course providing the kayaks for the event and they’d were to be in the form of Pro Angler 12 kayaks!. The thought of fishing the World Championships was an exciting one, though fishing from a Pro Angler wasn’t quite having the same effect.

November arrived and I met up with the other two members of Hobie Team GB and be flew out to Texas. Twenty four hours later I was introduced to my trusty steed for the event, the Pro Angler 12.

To be honest it was the first time that I’d really looked very closely at the Pro Angler, I had little choice to be honest!. I looked over the kayak from bow to stern and was quickly up to speed on the rudder controls, the seat, mirage drive, front hatch, battery pack, etc. Once I started throwing my rods and tackle aboard it suddenly didn’t seem so big. The trolley was fitted with the aid of another competitor, though this could still be easily achieved single handed by rolling the kayak onto its side.

Anyway, to cut a long story short, by the end of the tournament my views regarding the Pro Angler had changed considerably, it was indeed an excellent fishing tool. Yes, it has some limitations and drawbacks (doesn’t any kayak?), though as a fishing kayak it excelled in the conditions that I tested it in. I decided to produce a basic review of the Pro Angler 12 which can be read below.

The basic specs are as follows:

  • Length: 12' / 3.66 m
  • Width: 36" / 0.91 m
  • Capacity: 500 lbs / 227 kg
  • Fitted Hull Weight: 98 lbs / 44.4 kg
  • Fully Rigged Weight: 120 lbs / 54.4 kg
  • Hull Construction: Rotomolded Polyethylene

Oh, let’s make no bones about this, the PA 12 is a big and heavy kayak!. It’s designed with stability and comfort in mind and in these areas it excels. All areas of the kayak are easily accessible when afloat and standing whilst fishing is no problem whatsoever. The few days I spent fishing from the PA 12 I was regularly accessing the front hatch, the livewell, standing to cast, etc. I was initially quite concerned with how the PA12 would fare in choppy water. This wasn’t an issue for the first 3 days I fished from it, however, on the final day’s fishing the wind blew up and the water was quite choppy with a steady swell pushing through the lake I was fishing. At first I felt quite uncomfortable, this was due to the higher seating position creating a greater movement as the kayak rolled in the swell. I soon adjusted and realised that the PA 12 was quite happy in choppy water or a rolling swell, even side on.

The photos below show the PA 12 with a livewell loosely fitted (not plumbed in), note, the Mirage Drive is not fitted.

My biggest concern with the PA 12 was moving it around on land, though with the trolley fitted it’s no different from any other kayak. Sure, it’s easier to fit the trolley using two people, though one person can easily roll the kayak onto its side and the trolley can be inserted and the kayak rolled back. The biggest issue with the PA 12 is transportation. With a large flatbed pickup it’s not an issue, the same goes for a low level trailer. However, roof mounting a PA isn’t quite so easy!. There are videos on You Tube showing how people have overcome this potential problem, though it’s still probably best achieved with the use of two people.

A real selling point of the Pro Angler kayaks is the Vantage seat, it really is a fantastic piece of kit!.

This deluxe chair is designed with Hobie's new comfort-mesh for breathability. It can be adjusted for height as well as tilt on both the seat back and seat base with a simple twist of an arm rest. Adjustment whilst afloat is quick and easy in all respects. The integrated Boa System allows for ultimate lumbar support via one-handed dial adjustment. The seat will fold up out of the way for stand-up fishing if required. The seat is also easily removable for use on-shore use should you want a chair for camping or just relaxing whilst ashore.


I tried it in both the low and high positions, though I preferred the lower seating position. This is possibly due to the fact I’m just used to sitting low in a kaya. Perhaps if I’d fished for a much longer period I’d have moved up to the higher setting. This is the most adjustable and comfortable seat that I’ve experienced on a fishing kayak.

The front hatch on the PA 12 is big and can swallow large amounts of gear. It is supplied with a removable liner (not shown) which I found quite handy as it allowed easy transportation of tackle to and from the kayak.

Front hatch  Front hatch

I’d not normally access the front hatch of a kayak whilst afloat due to the inherent dangers of such a manoeuvre!. However, the high stability of the PA 12 makes accessing the front hatch whilst afloat both easy and safe. Opening the front hatch is a simple affair, release two bungee cords and you’re in. I had some fun on my final day fishing from this kayak, powering through some choppy water. Despite plenty of water coming over the front hatch, there was no problem with water ingress into the kayak.

The PA 12 has a sail mount allowing use of the optional Hobie sail kit, though it’s not something I’ve tried to date. If you want to see the PA 12 under sail you can view a video on You Tube be clicking >>here<<.

The PA 12 has the facility to store up to four 7’ rods horizontally whilst afloat (the PA 14 stores up to six). It’s a simple case of inserting the rod tips into the tubes just behind the front hatch and lying them down next to the seat. They can then be secured in position with retractable bungee cords fitted to the ‘mid-ship’ handles. At the time I had a livewell fitted so I tended to store the rods vertically in the livewell rod holders in order to keep the kayak foot wells clear. That said, it’s a very handy facility to have.

Moving onto the cockpit area. As can be seen in the photos above and below the working area is large and flat.


The cockpit floor is dominated by the Mirage Drive mounting hole. The Mirage Drive on the Pro Angler is fitted with the upgraded Turbo Fins as standard. Fitting and removing the Mirage Drive is quick and easy, taking only seconds. The PA 12 is also supplied with a two piece paddle and T-handle which can be used when the water is too shallow to allow effective use of the Mirage Drive.

The photo above show the presence of two replaceable mounting boards which are ideal for mounting fish finders, cameras and other accessories. Track systems such as YakAttack’s GearTrac systems are also easily fitted. There are also two large grip pads fitted to the cockpit floor to aid standing.

The storage facilities continue with the presence of a large ‘twist & seal’ storage compartment in front of the seat which holds Plano style lure boxes. The box holding mechanism can be removed if required to allow a large opening into the kayak.

The rudder on the PA 12 is a retractable affair, lowering and raising the rudder is achieved single handed using a lockable pull cord on the right hand side of the cockpit. The steering control can be positioned on either side of the cockpit to suit the user. Initially the rudder control seemed overly sensitive, though I soon adjusted to it and I found the PA 12 incredibly manoeuvrable for such a large kayak!


There are yet more storage facilities as you continue aft with small nets either side of the seat and storage for up to two large Plano lure boxes beneath the seat itself. There’s also a flat area either side of the seat which I found particularly useful for placing odds and sods whilst fishing. Multiple pad eyes are fitted around the seat area which can be used for clipping accessory leashes to the kayak as required.

As can be seen from the photographs below, the front and rear of the kayak feature oversize lifting handles, as well as two drain holes positioned below the rear lifting handle.


The draft of the kayak was surprisingly small considering it’s overall size, this enabled it to venture into very shallow water without any real issues. Consideration has to be given to the Turbo fins with regards to damage when in shallow water. ‘Feathering’ the drive to minimise fin movement still allows the PA 12 to progress forwards whilst minimising the chance of damage to the fins.

The rear tank well area is huge and I positioned a livewell into the tank well (not plumbed in) to provide an idea of the size. There’s a large 8” ‘Twist & Seal’ hatch on the bed of the tank well that provides access inside the hull as required. There are also two capped vertical moulded rod holders angled for trolling (visible either side of the livewell).

A Lowrance-Ready built-in transducer mount features pre-installed through-hull cable plugs. Fish finders can be installed in minutes without gluing transducers or drilling holes in the kayak.

So overall I was surprisingly impressed with the PA 12 as a fishing kayak, it’s fair to say that is exceeded my expectations in most areas. Yes, it has it’s drawbacks, it’s large, heavy and is affected by strong side winds. However it’s perfect for sheltered venues, both fresh and saltwater. I’ve heard those who say that they wouldn’t take the PA12 to sea, I would, though I’d avoid surf and rough water in windy conditions. It ideally needs clean launch areas and if car topping the kayak, assistance or good loading technique is a must.

The PA 12 was surprisingly fast for such a large kayak, even when peddling into a head wind the performance of the PA 12 was hardly affected. I found myself looking over to areas of the lake that (considering the wind and chop) I’d not have bothered to paddle over to in my Prowler Big Game. However, I didn’t give it a second thought in the PA 12, difficulty in covering distances was not an issue that I experienced.

I’d probably not recommend the PA 12 as a great all round kayak, it’s let down by its sheer weight and size. However, it’s those ‘attributes’ that allows it to excel as a fishing platform in more sheltered waters.

The Pro Angler 12 can be seen and ‘test driven’ at the Hobie Centre in Poole, Dorset.

Hobie Livewell – initial review (part 1)

I had some exposure to the Hobie Livewell whilst fishing the Hobie World Championships in August this year. However, I only used it for dry storage and didn’t take the opportunity to check it over closely. I made my own livewell some time ago, though to be honest I’ve only ever used it for dry storage.

A few days ago I took delivery of a Hobie Livewell from the Hobie Centre and I took the opportunity to give the livewell a close examination!

The basic specifications are as follows:

  • Length: 20.0" / 0.508 m
  • Width: 15.0" / 0.381 m
  • Capacity: 8 gal. / 30.28 l
  • Height: 12.0" / 0.305 m

The livewell is custom designed to fit the current Hobie Mirage Outback, Sport, Adventure, Revolution, Pro Angler, Quest, Tandem Island, Oasis and Odyssey. Included with the livewell is a 6 Volt sealed Gel Battery, charger, instructions, down pipes (the Pro Angler requires the 7” pipe) and a ty-wrap!

It’s fairly lightweight, weighing in at 3-4kg without the battery fitted. It’s ready to use straight out of the box with only the battery needed to be charged. Below are various external views of the livewell.


The livewell is fitted with three rod holders as standard with the provision to fit two additional holders if required. Access to the livewell is via the large 8” ‘twist & seal’ hatch which makes accessing and securing the livewell quick and easy. The hatch features a large rubber seal and it’s hinged which ensures that losing the lid whilst afloat is not a possibility!.

There are two adjustable securing straps which attach to existing fittings on a Hobie kayak. Personally I’d of liked to have seen four securing straps, though I’ve utilised a bungee cord for additional security which will be demonstrated in Part 2 of this article. There’s a carry handle on the front of the livewell, though with the 8” hatch open the livewell is easily carried in the upright position by holding it around the rear of the hatch opening.

On the left hand side of the livewell is a small drain point which allows any remaining water to be drained from the livewell after use. On the right hand side of the livewell is the on/off switch.


As previously mentioned, access to the inside of the livewell is via the large ‘twist & seal’ hatch. The maximum capacity of the livewell is around eight gallons.


Once inside the livewell you’re able to view the Tsunami 500 GPH livewell pump and the overflow (discharge) tube. The pump itself is not a self-priming unit and requires the pick up pipe to be correctly orientated and the kayak to be moving forward at a decent speed – more on this later.


The brings me onto the power source, specifically the 6 Volt sealed Gel Battery. Hobie have used a 6 Volt battery to reduce the speed of the 12 Volt pump whilst increasing the battery life. With a fully charged battery, the pump can run continuously for over ten hours. The livewell comes with a 6 Volt battery charger and the initial charge takes several hours. The charger itself shows an orange light when charging which turns to a green light once the battery is fully charged. The battery connections are environmentally sealed, though if the battery is not fitted I’d advise covering the electrical connector on the livewell to prevent water ingress and potential corrosion.

The battery is positioned at the rear of the livewell beneath a plastic cover which is secured using bungee cord.


The battery is easily removed and fitted in under a minute. The livewell will mainly be used for dry storage and the battery will not be fitted unless required. In Part 2 I’ll look at mounting the livewell to the kayak as well as potential design problems and how they can be overcome.

Coming soon! – Reviews of the Hobie Pro Angler 12 and Hobie Livewell

Over the next week or so I’ll publish reviews of the Hobie Pro Angler 12 kayak and the Hobie Livewell. They’re both great pieces of kit, watch this space!


Lake Fayette – Hobie World Championships (Final Day)

Thursday the 8th November was the third and final day of the Hobie World Championships. The first day had seen me placed joint last with no fish above 14” submitted, the second day had seen my take 4th place, what would the third day hold in store for me and the GB Team?? (David Morris and Ian Harris). I really needed to secure my limit and hopefully that’d include some decent fish above 17”, that’d give me a decent chance of finishing in the top half of the table.

It was another early start, up a silly o’clock, rigging the kayaks at around 0630 with the official launch time at 0730. I’d decided on a simple game plan, I was going to fish a Senko worm rigged Texas style over two particular areas of the lake, specifically the areas that had produced for me during the previous day. I was checked in early and sat  afloat for twenty minutes or so whilst the remainder of the anglers completed rigging, check-in, etc.

The morning was cooler than previous days and a light mist was hanging over most of the lake. It was particularly picturesque and I was keen to get out there and get fishing. Confidence was high, it’s amazing what catching fish does for your confidence!

At 0730 the starting horn blew and over forty Hobie Pro Angler 12 kayaks powered off into the mist. I hung back and let the crowd disappear, my chosen grounds were close by and I was more than happy for folk to push out into the lake before I commenced fishing.

There wasn’t much of a breeze and the drift was considerably slower than I’d have liked. Despite a few drifts, the first half hour proved rather fruitless, however, I’d experienced a couple of gentle hits to the lure, so I chose to persevere at this spot for a couple of hours at least.

As it happened I didn’t have to wait too much longer for my first hook-up of the day. It was particularly lively and felt like a rather chunky fish. I wasn’t disappointed when the fish came alongside!. I soon had it safely netted and aboard the kayak. The measuring stick was bought swiftly into action and the camera recorded the size.. 18½”, great start!

It wasn’t even 0800 and my first fish of the day was safely aboard, measured, photographed and returned. The initial pressure of catching a fish was off and my next aim was to secure my three fish limit. As I peddled off to start my drift again I heard a slightly odd noise behind my seat. I spun around to see my landing net a couple of metres behind the kayak, sinking net first with the handle up in the air at forty five degrees. It was a sad sight that lasted a couple more seconds before it disappeared from view. From now on I’d need to take extra care with any fish. I had some lip grips to hand so all was not lost (and they were leashed to the kayak!)It was approximately twenty minutes later when my worm was hit hard and I was soon lifting my second fish of the day onto the kayak.

It measured in at 16¼” which was respectable, one more fish and I’d have my limit!. I only had to wait ten more minutes for that third fish, it was no monster at 15½”, but it was the all important third fish. It was photographed and returned at 0829, it’d taken fifty nine minutes to secure my limit, the pressure was really off and could concentrate on trying to catch some larger fish.

The fish continued to come to the kayak, though they were all measuring in around 14” and as the wind continued to increase the fishing action dried up.

Below is a photo of David Morris of Team GB adjusting his tackle, note the angler fishing up close and personal with a reed bed in the background!

There was soon a light chop on the water with a scattering of white horses making an appearance. The Pro Angler 12 handled the chop far better than I expected. Sure, it’s a big kayak and you sit high up, initially it felt a little uncomfortable, though I soon adjusted to the handling of the PA12 and continued to enjoy the fishing despite the deteriorating weather.

By midday I’d effectively stopped catching fish. I moved around the local area and tried a few more drifts, this resulted in a couple of under-sized fish, though that was about it. The wind continued to pick up and at one stage was blowing a steady 15-20mph. I powered the PA12 through the chop, the result being spray flying above my head and into my face as I crashed through the bigger waves, I couldn’t help but chuckle to myself.

As the finish time loomed I decided to call it quits a tad early and headed in. I drift fished as much as possible all the way into the launch zone, pulling and stowing my gear a hundred metres before I hit shore. Once checked in it was a case of submitting my catch return for the day along with supporting photographs prior to de-rigging whilst enjoying an ice cold Coke!.

Team GB faired fairly well overall, all thing considered. The Largemouth Bass were a new species for us (ok, I managed a brief session for a day in August), the techniques and end tackle were all new. The first day had been a steep learning curve for us all, though we put up a very respectable performance of the following two days.

The Team GB results were as follows:

Day 1:

22nd place: Ian Harris (GB) 2 fish for 37”

32nd place: David Morris (GB) 1 fish for 15.5”

Joint 34th place: Rob Appleby (GB) Nil return

Day 2:

4th place: Rob Appleby (GB) 3 fish for 53.75”

23rd place: David Morris (GB) 3 fish for 44.5”

Joint 24th place: Ian Harris (GB) Nil return

Day 3:

15th place: Rob Appleby (GB) 3 fish for 50.25”

19th place: Ian Harris (GB) 3 fish for 49.5”

33rd place: David Morris (GB) 2 fish for 33.5”


Final results:

27th place: Rob Appleby (GB) cumulative length 104”

31st place: David Morris (GB) cumulative length 93.5”

32nd place: Ian Harris (GB) cumulative length 86.5”

Considering the calibre of anglers present, allied with Team GB’s lack of experience with the species, methods and locality, I think it’s fair to say that we put in a very respectable performance!.

I’d like to convey a huge gratitude of thanks to the Hobie Cat Centre, Daiwa UK, Veals Tackle and Overboard for supporting Team GB for this event.

The Pro Angler 12 proved itself to be a very capable kayak and continually surprised me with an impressive turn of speed for a kayak of this size. It’s extremely stable and a fantastic platform to fish off. I think what surprised me most was how it handled itself in choppy water, it exceeded my expectation in most areas. If you fancy trying out a PA12 they’re available to take afloat and try at the HobieCat Centre, located at Poole in Dorset.